- Visibility on the instantaneous production
- Battery terminal voltage
This solar controller MPPT 20 A allows to optimize the output of solar panels. It is suitable for 12 V and 24 V installations (up to 260 W of panels in 12 V and 520 W in 24 V), it has a three-phase charge cycle with temperature compensation.
Function | Optimization of the solar panels yield (gain of 20 to 30%) and complete and optimal recharge of the battery. |
---|---|
Maximum power of the panels (12V/24V) | 260 W/520 W. |
Maximum panel voltage | 92 V. |
LCD control panel | Easy setting of the regulator and access to the voltage and load information (intensity produced by the panels, voltages...). |
Setting of the type of batteries | 3 charge cycles available (Closed lead, Gel, Open lead). |
Charge cycle | Three-phase charge cycle with temperature compensation for optimal battery charging. Equalization cycle (depending on battery type selection). |
Self-consumption | 20 mA. |
Temperature compensation | - 0.03 V/degree. |
Electrical protections | Reverse polarity battery and solar panels/Solar panel overproduction/Temperature/Short circuit panel input and consumer output. |
IP protection | IP32. |
Dimensions | 220 x 154 x 52 mm. |
Section in mm² of the terminal blocks | 16 mm². |
Maximum consumer current | 20 A. |
Weight | 1,1 kg. |
The efficiency of MPPT technology on this range of regulators reaches 98%.
The regulator allows the storage of solar production data visible on the LCD screen.
As an option, a remote control panel can be associated with it.
This range extends from 10 to 40 Amp. You will find the whole range in the product sheet available under this link.
Les régulateurs MPPT optimisent le rendement des panneaux solaires - plus d'infos sur cette technologie sur notre blog conseil.