Electrical panel with 16 circuit breakers
ETA16
- 16 circuits - 12V or 24V
- Dimension 246*240 mm
- Pre-wired panel
- Optional distribution terminal block
- CHOICE OF CIRCUIT BREAKERS
Single pole 16 breaker electrical panel
Seatronic electrical panels have been designed to protect your electrical installation in case of a fault. This protection is ensured, for each output, by a thermal circuit breaker rated from 3 to 15 Amps (to be determined at the time of order). An LED switch allows you to visualize the operation of each circuit.
A label plate is supplied with the panel.
| Version | 16 single-pole circuits | |
|---|---|---|
| Function | Circuit control and protection. | |
| Voltage | 12 V or 24 V | |
| Type of circuit breaker | Thermal (from 3 to 15 A). | |
| Switch | Single pole with LED for monitoring the operation of the circuit. | |
| Operating temperature | From -20°C to 50°C | |
| Connections | 6.3 mm female clips | |
| Dimensions (H x W) | 246 mm x 240 mm | |
| Pre-wired |
|
|
The entire range has been designed to be modular, so the panels can be combined with each other to ensure the scalability of the installation. Furthermore, great care has been taken to ensure the quality of the cables and terminals used (reinforced terminals) in order to guarantee maximum reliability of the system. In addition to the panels, a set of terminal blocks fixed on DIN rail, in order to ensure an optimal distribution from each of the circuits is proposed. These terminal blocks are available in kit form or can be pre-wired in our Saint Malo workshop. In the case of the pre-wired version, the length of the bundle between the panel and the terminal blocks must be specified. These panels are assembled in our workshop in Saint Malo, which allows us to adapt your choice of circuit breakers to your needs. You can use the following link to send us your CHOICE OF BREAKER CALIBER. |
Available options:
-
16 breaker single-pole panel mounting terminal block
Wiring kits to be assembled allow to guarantee safety and to ensure an easy maintenance.
This kit comes with all the components to assemble, allowing you to install as a professional would. The distribution from the electrical panel becomes clear and understandable, facilitating the maintenance and electrical servicing of your boat.
-
Pre-wired 16 breaker single pole switchboard terminal block.
Pre-assembled wiring kits ensure a professional quality, successful and easy to maintain installation on board.
This kit is a set of terminal blocks mounted on a DIN rail connected to a wiring harness to be connected to the boat's electrical panel. All you have to do is connect the boat's consumers to obtain a clear installation. Visually the distribution from the electrical panel becomes clear and understandable, facilitating the maintenance and electrical servicing of your boat.
This kit is delivered with all the pre-assembled components allowing you to ensure the installation as a professional would.
Characteristics of the kits :
| Function | Wiring kit for 16 breakers electrical panel connection |
|---|---|
| Admissible cable section | from 1 to 4mm² |
| Connection method | By screw |
| Max current per terminal block | 20A |
| Compliance | TBA |
| Dimensions | 2 x 480*48*47mm |
| Kit Contents |
|
Single pole 16 breaker electrical panel
Seatronic electrical panels have been designed to protect your electrical installation in case of a fault. This protection is ensured, for each output, by a thermal circuit breaker rated from 3 to 15 Amps (to be determined at the time of order). An LED switch allows you to visualize the operation of each circuit.
A label plate is supplied with the panel.
| Version | 16 single-pole circuits | |
|---|---|---|
| Function | Circuit control and protection. | |
| Voltage | 12 V or 24 V | |
| Type of circuit breaker | Thermal (from 3 to 15 A). | |
| Switch | Single pole with LED for monitoring the operation of the circuit. | |
| Operating temperature | From -20°C to 50°C | |
| Connections | 6.3 mm female clips | |
| Dimensions (H x W) | 246 mm x 240 mm | |
| Pre-wired |
|
|
The entire range has been designed to be modular, so the panels can be combined with each other to ensure the scalability of the installation. Furthermore, great care has been taken to ensure the quality of the cables and terminals used (reinforced terminals) in order to guarantee maximum reliability of the system. In addition to the panels, a set of terminal blocks fixed on DIN rail, in order to ensure an optimal distribution from each of the circuits is proposed. These terminal blocks are available in kit form or can be pre-wired in our Saint Malo workshop. In the case of the pre-wired version, the length of the bundle between the panel and the terminal blocks must be specified. These panels are assembled in our workshop in Saint Malo, which allows us to adapt your choice of circuit breakers to your needs. You can use the following link to send us your CHOICE OF BREAKER CALIBER. |
Available options:
-
16 breaker single-pole panel mounting terminal block
Wiring kits to be assembled allow to guarantee safety and to ensure an easy maintenance.
This kit comes with all the components to assemble, allowing you to install as a professional would. The distribution from the electrical panel becomes clear and understandable, facilitating the maintenance and electrical servicing of your boat.
-
Pre-wired 16 breaker single pole switchboard terminal block.
Pre-assembled wiring kits ensure a professional quality, successful and easy to maintain installation on board.
This kit is a set of terminal blocks mounted on a DIN rail connected to a wiring harness to be connected to the boat's electrical panel. All you have to do is connect the boat's consumers to obtain a clear installation. Visually the distribution from the electrical panel becomes clear and understandable, facilitating the maintenance and electrical servicing of your boat.
This kit is delivered with all the pre-assembled components allowing you to ensure the installation as a professional would.
Characteristics of the kits :
| Function | Wiring kit for 16 breakers electrical panel connection |
|---|---|
| Admissible cable section | from 1 to 4mm² |
| Connection method | By screw |
| Max current per terminal block | 20A |
| Compliance | TBA |
| Dimensions | 2 x 480*48*47mm |
| Kit Contents |
|
Single pole 16 breaker electrical panel
Seatronic electrical panels have been designed to protect your electrical installation in case of a fault. This protection is ensured, for each output, by a thermal circuit breaker rated from 3 to 15 Amps (to be determined at the time of order). An LED switch allows you to visualize the operation of each circuit.
A label plate is supplied with the panel.
| Version | 16 single-pole circuits | |
|---|---|---|
| Function | Circuit control and protection. | |
| Voltage | 12 V or 24 V | |
| Type of circuit breaker | Thermal (from 3 to 15 A). | |
| Switch | Single pole with LED for monitoring the operation of the circuit. | |
| Operating temperature | From -20°C to 50°C | |
| Connections | 6.3 mm female clips | |
| Dimensions (H x W) | 246 mm x 240 mm | |
| Pre-wired |
|
|
The entire range has been designed to be modular, so the panels can be combined with each other to ensure the scalability of the installation. Furthermore, great care has been taken to ensure the quality of the cables and terminals used (reinforced terminals) in order to guarantee maximum reliability of the system. In addition to the panels, a set of terminal blocks fixed on DIN rail, in order to ensure an optimal distribution from each of the circuits is proposed. These terminal blocks are available in kit form or can be pre-wired in our Saint Malo workshop. In the case of the pre-wired version, the length of the bundle between the panel and the terminal blocks must be specified. These panels are assembled in our workshop in Saint Malo, which allows us to adapt your choice of circuit breaker rating to your needs. You can use the following link to send us your CHOICE OF BREAKER CALIBER. |
Available options:
-
16 breaker single-pole panel mounting terminal block
Wiring kits to be assembled allow to guarantee safety and to ensure an easy maintenance.
This kit comes with all the components to assemble, allowing you to install as a professional would. The distribution from the electrical panel becomes clear and understandable, facilitating the maintenance and electrical servicing of your boat.
-
Pre-wired 16 breaker single pole switchboard terminal block.
Pre-assembled wiring kits ensure a professional quality, successful and easy to maintain installation on board.
This kit is a set of terminal blocks mounted on a DIN rail connected to a wiring harness to be connected to the boat's electrical panel. All you have to do is connect the boat's consumers to obtain a clear installation. Visually the distribution from the electrical panel becomes clear and understandable, facilitating the maintenance and electrical servicing of your boat.
This kit is delivered with all the pre-assembled components allowing you to ensure the installation as a professional would.
Characteristics of the kits :
| Function | Wiring kit for 16 breakers electrical panel connection |
|---|---|
| Admissible cable section | from 1 to 4mm² |
| Connection method | By screw |
| Max current per terminal block | 20A |
| Compliance | TBA |
| Dimensions | 2 x 480*48*47mm |
| Kit Contents |
|
ETA16
7 Items
New product
Sur notre blog conseil, découvrez le tableau électrique fabriqué sur mesure pour cette belle vedette de 1933, ainsi que d'autres tableaux électriques.
