Electrical panel with 12 circuit breakers
- 12 circuits - 12V or 24V
- Dimension 190*240mm
- Pre-wired panel
- Optional distribution terminal block
- CHOICE OF CIRCUIT BREAKERS
Single pole 12 circuit breaker switchboard
Seatronic electrical panels have been designed to protect your electrical installation in case of a fault. This protection is ensured, for each output, by a thermal circuit breaker calibrated from 3 to 15 Amperes (to be determined when ordering). An LED switch allows you to visualize the operation of each circuit.
A label plate is supplied with the panel.
Version | 12 single-pole circuits |
---|---|
Function | Circuit control and protection. |
Voltage | 12 V or 24 V |
Type of circuit breaker | Thermal (from 3 to 15 A). |
Switch | Single pole with LED for monitoring the operation of the circuit. |
Operating temperature | From -20°C to 50°C |
Connections | 6.3 mm female clips |
Dimensions (H x W) | 190 mm x 240 mm |
Pre-wiring |
The panel is pre-wired Different distribution terminal block options are available |
The entire range has been designed to be modular, so the panels can be combined with each other to ensure the scalability of the installation. Furthermore, great care has been taken to ensure the quality of the cables and terminals used (reinforced terminals) in order to guarantee maximum reliability of the system. In addition to the panels, a set of terminal blocks fixed on DIN rail, in order to ensure an optimal distribution from each of the circuits is proposed. These terminal blocks are available in kit form or can be pre-wired in our Saint Malo workshop. In the case of the pre-wired version, the length of the bundle between the panel and the terminal blocks must be specified. These panels are assembled in our workshop in Saint Malo, which allows us to adapt your choice of circuit breakers to your needs. You can use the following link to send us your CHOICE OF BREAKER CALIBER. |
Available options:
-
12 breaker panel mounting terminal block for single pole panels
Wiring kits to be assembled allow to guarantee safety and to ensure an easy maintenance.
This kit comes with all the components to assemble, allowing you to install as a professional would. The distribution from the electrical panel becomes clear and understandable, facilitating the maintenance and electrical servicing of your boat.
-
Pre-wired 12-pin switchboard terminal block.
Pre-assembled wiring kits ensure a professional quality, successful and easy to maintain installation on board.
This kit is a set of terminal blocks mounted on a DIN rail connected to a wiring harness to be connected to the boat's electrical panel. All you have to do is connect the boat's consumers to obtain a clear installation. Visually the distribution from the electrical panel becomes clear and understandable, facilitating the maintenance and electrical servicing of your boat.
This kit is delivered with all the components pre-assembled allowing you to ensure the installation as a professional would.
Characteristics of the kits :
Function | Wiring kit for 12 breakers electrical panel connection |
---|---|
Admissible cable section | from 1 to 4mm² |
Connection method | By screw |
Max current per terminal block | 20A |
Compliance | TBA |
Dimensions | 2 x 360*48*47mm |
Kit Contents |
|
Single pole 12 circuit breaker switchboard
Seatronic electrical panels have been designed to protect your electrical installation in case of a fault. This protection is ensured, for each output, by a thermal circuit breaker calibrated from 3 to 15 Amperes (to be determined when ordering). An LED switch allows you to visualize the operation of each circuit.
A label plate is supplied with the panel.
Version | 12 single-pole circuits |
---|---|
Function | Circuit control and protection. |
Voltage | 12 V or 24 V |
Type of circuit breaker | Thermal (from 3 to 15 A). |
Switch | Single pole with LED for monitoring the operation of the circuit. |
Operating temperature | From -20°C to 50°C |
Connections | 6.3 mm female clips |
Dimensions (H x W) | 190 mm x 240 mm |
Pre-wiring |
The panel is pre-wired Different distribution terminal block options are available |
The entire range has been designed to be modular, so the panels can be combined with each other to ensure the scalability of the installation. Furthermore, great care has been taken to ensure the quality of the cables and terminals used (reinforced terminals) in order to guarantee maximum reliability of the system. In addition to the panels, a set of terminal blocks fixed on DIN rail, in order to ensure an optimal distribution from each of the circuits is proposed. These terminal blocks are available in kit form or can be pre-wired in our Saint Malo workshop. In the case of the pre-wired version, the length of the bundle between the panel and the terminal blocks must be specified. These panels are assembled in our workshop in Saint Malo, which allows us to adapt your choice of circuit breakers to your needs. You can use the following link to send us your CHOICE OF BREAKER CALIBER. |
Available options:
-
12 breaker panel mounting terminal block for single pole panels
Wiring kits to be assembled allow to guarantee safety and to ensure an easy maintenance.
This kit comes with all the components to assemble, allowing you to install as a professional would. The distribution from the electrical panel becomes clear and understandable, facilitating the maintenance and electrical servicing of your boat.
-
Pre-wired 12-pin switchboard terminal block.
Pre-assembled wiring kits ensure a professional quality, successful and easy to maintain installation on board.
This kit is a set of terminal blocks mounted on a DIN rail connected to a wiring harness to be connected to the boat's electrical panel. All you have to do is connect the boat's consumers to obtain a clear installation. Visually the distribution from the electrical panel becomes clear and understandable, facilitating the maintenance and electrical servicing of your boat.
This kit is delivered with all the components pre-assembled allowing you to ensure the installation as a professional would.
Characteristics of the kits :
Function | Wiring kit for 12 breakers electrical panel connection |
---|---|
Admissible cable section | from 1 to 4mm² |
Connection method | By screw |
Max current per terminal block | 20A |
Compliance | TBA |
Dimensions | 2 x 360*48*47mm |
Kit Contents |
|
Single pole 12 circuit breaker switchboard
Seatronic electrical panels have been designed to protect your electrical installation in case of a fault. This protection is ensured, for each output, by a thermal circuit breaker calibrated from 3 to 15 Amperes (to be determined when ordering). An LED switch allows you to visualize the operation of each circuit.
A label plate is supplied with the panel.
Version | 12 single-pole circuits |
---|---|
Function | Circuit control and protection. |
Voltage | 12 V or 24 V |
Type of circuit breaker | Thermal (from 3 to 15 A). |
Switch | Single pole with LED for monitoring the operation of the circuit. |
Operating temperature | From -20°C to 50°C |
Connections | 6.3 mm female clips |
Dimensions (H x W) | 190 mm x 240 mm |
Pre-wiring |
The panel is pre-wired Different distribution terminal block options are available |
The entire range has been designed to be modular, so the panels can be combined with each other to ensure the scalability of the installation. Furthermore, great care has been taken to ensure the quality of the cables and terminals used (reinforced terminals) in order to guarantee maximum reliability of the system. In addition to the panels, a set of terminal blocks fixed on DIN rail, in order to ensure an optimal distribution from each of the circuits is proposed. These terminal blocks are available in kit form or can be pre-wired in our Saint Malo workshop. In the case of the pre-wired version, the length of the bundle between the panel and the terminal blocks must be specified. These panels are assembled in our workshop in Saint Malo, which allows us to adapt your choice of circuit breakers to your needs. You can use the following link to send us your CHOICE OF BREAKER CALIBER. |
Available options:
-
12 breaker panel mounting terminal block for single pole panels
Wiring kits to be assembled allow to guarantee safety and to ensure an easy maintenance.
This kit comes with all the components to assemble, allowing you to install as a professional would. The distribution from the electrical panel becomes clear and understandable, facilitating the maintenance and electrical servicing of your boat.
-
Pre-wired 12-pin switchboard terminal block.
Pre-assembled wiring kits ensure a professional quality, successful and easy to maintain installation on board.
This kit is a set of terminal blocks mounted on a DIN rail connected to a wiring harness to be connected to the boat's electrical panel. All you have to do is connect the boat's consumers to obtain a clear installation. Visually the distribution from the electrical panel becomes clear and understandable, facilitating the maintenance and electrical servicing of your boat.
This kit is delivered with all the components pre-assembled allowing you to ensure the installation as a professional would.
Characteristics of the kits :
Function | Wiring kit for 12 breakers electrical panel connection |
---|---|
Admissible cable section | from 1 to 4mm² |
Connection method | By screw |
Max current per terminal block | 20A |
Compliance | TBA |
Dimensions | 2 x 360*48*47mm |
Kit Contents |
|
Sur notre blog conseil, découvrez le tableau électrique fabriqué sur mesure pour cette belle vedette de 1933, ainsi que d'autres tableaux électriques.