- New
- All TZ Pro software (4 displays via HDMI)
- Intel Core i7 1255U (1.7 - 4.7 Ghz) 12th Gen
- DDR4 32 GB
- 500 GB SSD
- W10 pro
- 9 to 36 V
- Power consumption: 7 to 60 W
- 230x200x68 mm (L x W x H)
- 2.64 kg
- 2-year warranty
New products
This flush-mount socket has 1 USB-A and 1 USB-C input, enabling you to recharge your various mobile devices. In addition to recharging phones and tablets, this socket also lets you charge Macbooks and laptops with USB C charging ports.
This model features a switch integrated into the socket, enabling charging to be switched off when the module is powered.
Elegant and discreet, the SEATRONIC socket can be flush-mounted in the wall of your dashboard or cell on board a converted van or boat.
This electrical equipment is recommended for use with a certified 100W fast-charging cable, as an ordinary cable will not be able to withstand the high charging current and may overheat or the product may not work.
Function | USB and USB-C 12 V - 24 V fast-charging socket for boats, motorhomes or camper vans. Features an integrated switch to interrupt charging. For recharging mobile equipment, including certain laptops (those with a usb c charging socket and macbooks). The usb c socket features a voltage booster (output voltage can be 20V even when the supply voltage is 12V). |
---|---|
Input voltage | 8-32 V DC |
USB/QC 3.0 output | 3.6-6.5V / 3A, 6.5-9V / 2A, 9-12V / 1.5A (18W maximum). Charging voltage adapts to device requirements. |
USB C/QC4.0 output | 5V/3A 9V/3A,12V/3A,15V/3A,20V/3.25A (65W Max). Charging voltage adapts to device requirements. |
Max power (two ports) | 83W |
Max standby current | 5mA |
Drilling diameter | Ø29.2 mm |
Connection | 6.3mm Faston-type flat plug |
Mounting | Plastic locknut supplied |
Service life | + Over 5000 cycles |
Sealing | IP65 front panel with cap included |
Operating temperature range | from -20°C to 80°C |
Protection | Temperature / Short circuit / Overvoltage / Reverse polarity |
Important information | Phones charge at the same speed on a 12 or 24 V system, but a 24 V system must be used to obtain the 60 W total power suitable for notebooks. |
Three additional support plates, with one, two or three, are available for mounting. We also offer modules for surface mounting with one or two holes.
Sur notre blog conseil, découvrez LE TABLEAU ÉLECTRIQUE FABRIQUÉ SUR MESURE pour cette belle vedette de 1933.