- New
- All TZ Pro software (4 displays via HDMI)
- Intel Core i7 1255U (1.7 - 4.7 Ghz) 12th Gen
- DDR4 32 GB
- 500 GB SSD
- W10 pro
- 9 to 36 V
- Power consumption: 7 to 60 W
- 230x200x68 mm (L x W x H)
- 2.64 kg
- 2-year warranty
New products
Seatronic electrical panels are designed to protect your electrical installation in the event of a fault. Each output is protected by a thermal circuit breaker rated from 3 to 15 amperes (to be determined when ordering). An LED switch displays the operation of each circuit.
A label plate is supplied with the panel.
Version | 10 single-pole circuits - one cigar-lighter socket protected by a 15A circuit breaker |
---|---|
Function | Circuit control and protection. |
Voltage | 12 V or 24 V |
Circuit breaker type | Thermal (3 to 15 A). |
Switch | Single-pole with LED for monitoring circuit operation. |
Operating temperature range | From -20°C to 50°C |
Connection | 6.3 mm female clips |
Dimensions (H x W) | 190 mm x 240 mm |
Pre-wiring |
The panel is pre-wired Various terminal block options available |
The entire range has been designed to be modular, so panels can be combined with each other to guarantee scalability. In addition, great care has been taken to ensure the quality of the cables and lugs used (reinforced lugs) to ensure maximum reliability. To complement the switchboards, a set of DIN-rail-mounted terminal blocks is available for optimum distribution from each circuit. These terminal blocks are available in kit form, or can be pre-wired in our Saint Malo workshop. In the case of the pre-wired version, the length of the wiring harness between the panel and the terminal blocks must be specified. These switchboards are assembled in our Saint Malo workshop, enabling us to adapt your choice of circuit-breaker rating to your requirements. You can use the following link to send us your CHOICE OF BREAKER CALIBER.
|
Wiring kits for assembly guarantee safety and ease of maintenance.
This kit comes complete with all components for assembly, allowing you to carry out the installation as a professional would. The distribution from the electrical panel becomes clear and comprehensible, facilitating electrical maintenance and servicing of your boat.
Pre-assembled wiring kits guarantee a professional-quality, successful and easy-to-maintain installation on board.
The kit consists of a set of terminal blocks mounted on a DIN rail and connected to a cable harness for connection to the boat's electrical panel. All you have to do is connect the boat's consumers, and you've got a clear installation. Visually, the distribution from the electrical panel becomes clear and comprehensible, facilitating electrical maintenance and servicing of your boat.
This kit comes with all components pre-assembled, enabling you to carry out the installation as a professional would.
Function | Wiring kit for 10 breaker panel connection |
---|---|
Permissible cable cross-section | from 1 to 4mm² |
Connection method | Screw connection |
Max. current per terminal block | 20A |
Compliance | TBA |
Dimensions | 2 x 300*48*47mm |
Kit contents |
|
Seatronic electrical panels are designed to protect your electrical installation in the event of a fault. Each output is protected by a thermal circuit breaker rated from 3 to 15 amperes (to be determined when ordering). An LED switch displays the operation of each circuit.
A label plate is supplied with the panel.
Version | 10 single-pole circuits - one cigar-lighter socket protected by a 15A circuit breaker |
---|---|
Function | Circuit control and protection. |
Voltage | 12 V or 24 V |
Circuit breaker type | Thermal (3 to 15 A). |
Switch | Single-pole with LED for monitoring circuit operation. |
Operating temperature range | From -20°C to 50°C |
Connection | 6.3 mm female clips |
Dimensions (H x W) | 190 mm x 240 mm |
Pre-wiring |
The panel is pre-wired Various terminal block options available |
The entire range has been designed to be modular, so panels can be combined with each other to guarantee scalability. In addition, great care has been taken to ensure the quality of the cables and lugs used (reinforced lugs) to ensure maximum reliability. To complement the switchboards, a set of DIN-rail-mounted terminal blocks is available for optimum distribution from each circuit. These terminal blocks are available in kit form, or can be pre-wired in our Saint Malo workshop. In the case of the pre-wired version, the length of the wiring harness between the panel and the terminal blocks must be specified. These switchboards are assembled in our Saint Malo workshop, enabling us to adapt your choice of circuit-breaker rating to your requirements. You can use the following link to send us your CHOICE OF BREAKER CALIBER.
|
Wiring kits for assembly guarantee safety and ease of maintenance.
This kit comes complete with all components for assembly, allowing you to carry out the installation as a professional would. The distribution from the electrical panel becomes clear and comprehensible, facilitating electrical maintenance and servicing of your boat.
Pre-assembled wiring kits guarantee a professional-quality installation that's easy to maintain on board.
The kit consists of a set of terminal blocks mounted on a DIN rail and connected to a cable harness for connection to the boat's electrical panel. All you have to do is connect the boat's consumers, and you've got a clear installation. Visually, the distribution from the electrical panel becomes clear and comprehensible, facilitating electrical maintenance and servicing of your boat.
This kit comes with all components pre-assembled, enabling you to carry out the installation as a professional would.
Function | Wiring kit for 10 breaker panel connection |
---|---|
Permissible cable cross-section | from 1 to 4mm² |
Connection method | Screw connection |
Max. current per terminal block | 20A |
Compliance | TBA |
Dimensions | 2 x 300*48*47mm |
Kit contents |
|
Seatronic electrical panels are designed to protect your electrical installation in the event of a fault. Each output is protected by a thermal circuit breaker rated from 3 to 15 amperes (to be determined when ordering). An LED switch displays the operation of each circuit.
A label plate is supplied with the panel.
Version | 10 single-pole circuits - one cigar-lighter socket protected by a 15A circuit breaker |
---|---|
Function | Circuit control and protection. |
Voltage | 12 V or 24 V |
Circuit breaker type | Thermal (3 to 15 A). |
Switch | Single-pole with LED for monitoring circuit operation. |
Operating temperature range | From -20°C to 50°C |
Connection | 6.3 mm female clips |
Dimensions (H x W) | 190 mm x 240 mm |
Pre-wiring |
The panel is pre-wired Various terminal block options available |
The entire range has been designed to be modular, so panels can be combined with each other to guarantee scalability. In addition, great care has been taken to ensure the quality of the cables and lugs used (reinforced lugs) to ensure maximum reliability. To complement the switchboards, a set of DIN-rail-mounted terminal blocks is available for optimum distribution from each circuit. These terminal blocks are available in kit form, or can be pre-wired in our Saint Malo workshop. In the case of the pre-wired version, the length of the wiring harness between the panel and the terminal blocks must be specified. These switchboards are assembled in our Saint Malo workshop, enabling us to adapt your choice of circuit-breaker rating to your requirements. You can use the following link to send us your CHOICE OF BREAKER CALIBER.
|
Wiring kits for assembly guarantee safety and ease of maintenance.
This kit comes complete with all components for assembly, allowing you to carry out the installation as a professional would. The distribution from the electrical panel becomes clear and comprehensible, facilitating electrical maintenance and servicing of your boat.
Pre-assembled wiring kits guarantee a professional-quality, successful and easy-to-maintain installation on board.
The kit consists of a set of terminal blocks mounted on a DIN rail and connected to a cable harness for connection to the boat's electrical panel. All you have to do is connect the boat's consumers, and you've got a clear installation. Visually, the distribution from the electrical panel becomes clear and comprehensible, facilitating electrical maintenance and servicing of your boat.
This kit comes with all components pre-assembled, enabling you to carry out the installation as a professional would.
Function | Wiring kit for 10 breaker panel connection |
---|---|
Permissible cable cross-section | from 1 to 4mm² |
Connection method | Screw connection |
Max. current per terminal block | 20A |
Compliance | TBA |
Dimensions | 2 x 300*48*47mm |
Kit contents |
|
Sur notre blog conseil, découvrez le tableau électrique fabriqué sur mesure pour cette belle vedette de 1933, ainsi que d'autres tableaux électriques.