New products

€2,136.00
  • New
Chinook central unit
  • All TZ Pro software (4 displays via HDMI)
  • Intel Core i7 1255U (1.7 - 4.7 Ghz) 12th Gen
  • DDR4 32 GB
  • 500 GB SSD
  • W10 pro
  • 9 to 36 V
  • Power consumption: 7 to 60 W
  • 230x200x68 mm (L x W x H)
  • 2.64 kg
  • 2-year warranty
All new products
Optimum Power Lithium Battery 24V - 200 Ah
  • Optimum Power Lithium Battery 24V - 200 Ah

Optimum Power Lithium Battery 24V - 200 Ah

BLI24200
  • 5,000 charge cycles at 1 C
  • Maximum continuous current: 150 A
  • Integrated Bluetooth
  • 5 years warranty
  • Dimensions (W*L*H) : 520 x 260 x 220 mm
  • Weight : 36 kg

assignment_returned Data Sheet

description Instructions

Add to wishlist

€3,240.00 Tax included
IN STOCK !
Dispatched within 24 hours

Optimum Power 24V - 200Ah lithium battery

A significant breakthrough in energy storage: Advanced performance and simplified installation.

These lithium batteries have a BMS (battery management system) integrated in the battery and will be suitable for any application requiring a storage solution with superior performance (weight, charging speed or cycling performance).

Discover the story and the example of installation on our BLOG ADVICE

Function Plug and play replacement of lead-acid batteries by a more performing technology (cycling, recharge speed, depth of discharge and weight)
Technology LiFePo4 with integrated management system (BMS) which protects the battery of the overloads and ensures the balancing of the elements
Voltage / Capacity 24V - 200 Ah
Recommended continuous discharge current 150A
Discharge current (5 minutes) 200 A
Discharge current (10 seconds) 380 A
Charge voltage (Absorption) 28.8 V - 29.2 V
Self-consumption voltage 27.2V
Low cut-off voltage / Reconnection In order to preserve the battery in case of deep discharge, the battery is isolated when its voltage drops below 18V. The reconnection will be done automatically as soon as the battery reaches 20V.
High cut-off voltage/ Reconnection In order to protect the battery from overloads, the battery is isolated when its voltage exceeds 31V. The reconnection will automatically take place as soon as the battery drops below 29.2V.
Parallel connection Up to six batteries can be paralleled to increase the available capacity. Parallel batteries must have the same capacity.
Series connection Up to two batteries can be connected in series to power systems up to 48V. In the case where the batteries are put in series, the number of batteries in parallel is limited to 2. It will be possible to set up a 48V / 800Ah system using 200Ah batteries.
Self-discharge < 3% per month
Charging temperature 0 to 45 degrees
Discharge temperature -15 to 65 degrees
Number of cycles for a charge/discharge at 1C After 5000 cycles, the battery still has 80% of its capacity
IP protection IP66
Dimensions (W*L*H) 520 x 260 x 220mm (The terminals are embedded in the battery and the offset related to the handles is taken into account)
Terminal block M8
IP protection IP66
Warranty 5 years
Weight 36 kg

Sizing of the installation:

For more information on the dimensioning of the installation and the safety constraints, you can refer to the manual. When batteries are paralleled, the charge/discharge currents are naturally added.

Recommendations :

- Lithium batteries can absorb all their capacity in charge. It is normal to be apprehensive about the heat generated by the alternator to supply this current. Installing an alternator charger with a temperature sensor will allow you to optimize your charging while protecting your alternator from possible overheating.

BLI24200
3 Items

You might also like