- Reduced price
- New
- All TZ Pro software (4 displays via HDMI)
- Intel Core i7 1255U (1.7 - 4.7 Ghz) 12th Gen
- DDR4 32 GB
- 500 GB SSD
- W10 pro
- 9 to 36 V
- Power consumption: 7 to 60 W
- 230x200x68 mm (L x W x H)
- 2.64 kg
- 2-year warranty
New products
This 40 A MPPT solar controller allows to optimize the yield of solar panels. It is suitable for 12 V and 24 V installations (up to 550 W of panels at 12 V and 1100 W at 24 V), and also has a three-phase charging cycle with temperature compensation.
Function | Optimization of the solar panels' yield (20-30% gain) and complete and optimal recharge of the battery. |
---|---|
Maximum power of the panels (12 V/24 V) | 550 W / 1100 W. |
Maximum panel voltage | 100 V. |
LCD control panel | Easy setting of the regulator and access to the voltage and load information (intensity produced by the panels, voltages...). |
Setting of the type of batteries | 4 charge cycles available (one for gel and lithium batteries) and one charge cycle completely configurable by the user. |
Charge cycle | Three-phase charge cycle with temperature compensation for optimal battery charging. Equalization cycle (depending on battery type selection). |
Self-consumption | 0.7 W to 1.2 W. |
Temperature compensation | - 0,03 V / degree. |
Electrical protections | Reverse polarity battery and solar panels / Overproduction solar panel / Temperature / Short circuit panel input and consumer output. |
IP protection | IP32. |
Dimensions | 238 x 173 x 72,5 mm. |
Section in mm² of the terminal blocks | 10 mm². |
Maximum consumer current | 20 A. |
Weight | 2 kg. |
Theefficiency of MPPT technology on this range of regulators reaches 98%, and the additional technology of Multi Peak Tracking Technology allows to increase the production of the solar system in the case of a shadow partially projected on a panel.
In addition to pre-programmed charge cycles, suitable for gel, AGM and open batteries, the controller allows for a charge cycle with customized voltages. The controller allows the storage of solar production data for a period of up to one year.
This range extends from 10 to 60 Amp. You will find the whole range in the product sheet available under this link.