- Cable diameter: Ø2 - 6 mm
- IP68 RATING
- 46x20x28.5 mm
- Weight : 100 gr
This solar controller MPPT 20 A allows to optimize the output of solar panels. It is suitable for 12 V and 24 V installations (up to 260 W of panels in 12 V and 520 W in 24 V), it also has a three-phase charging cycle with temperature compensation.
This regulator has a particularly interesting format for the installation on board thanks to its reduced size case which will allow it to find its place easily. The pre-drilled side fins make it easy to attach. It has an excellent level of performance (conversion efficiency greater than 98%) and will optimize your solar installation in the best conditions.
|Function||Optimization of the solar panels yield (20 to 30% gain) and complete and optimal recharge of the battery. Compact format that facilitates on-board installation.|
|Maximum power of the panels (12 V/24 V)||260 W / 520 W.|
|Maximum panel voltage at 25° C||100 V.|
|Led supervision system||Intuitive setting and easy monitoring thanks to a system of 3 leds to know the state of charge of the batteries.|
|Setting of the type of batteries||4 charge cycles available, including one for lithium batteries, allowing compatibility with all technologies.|
|Charge cycle||Three-phase charge cycle with temperature compensation for optimal battery charging. Equalization cycle (depending on the type of batteries selected).|
|Self-consumption||0.12 W maximum.|
|Temperature compensation||- 0.03 V / degree.|
|Electrical protections||Reverse battery and solar panel polarity / Solar panel overproduction (limits the current to the nominal value of the controller) / Temperature.|
|Dimensions||150 x 105,6 x 61,5 mm.|
|Section in mm² of the terminal blocks||4 x 10 mm² (two solar panel inputs and two battery outputs).|
|Available options||Control panel, Bluetooth box and external temperature sensor (useful when the controller does not operate at the ambient temperature of the batteries).|
Theefficiency of MPPT technology on this range of controllers reaches 98%, and the additional technology of Multi Peak Tracking Technology allows to increase the production of the solar system in the case of a shadow partially projected on a panel.
Les régulateurs MPPT optimisent le rendement des panneaux solaires - plus d'infos sur cette technologie sur notre blog conseil.