- Reduced price
- Visibility on instant production
- Voltage at the battery terminals
This MPPT 20A solar controller optimizes the efficiency of solar panels. It is suitable for 12V and 24V installations (up to 260W of 12V and 520W 24V panels), it also has a three-phase charging cycle with temperature compensation.
This controller has a particularly interesting format for on-board installation thanks to its compact housing that will allow it to easily find its place. The pre-drilled side vanes simplify the mounting. It has an excellent level of performance (conversion efficiency greater than 98%) and will allow you to optimize your solar installation under the best conditions
|Function||Optimization of the efficiency of the solar panels (gain of 20 to 30%) and complete and optimal charging of the battery. Compact format for easy on-board installation.|
|Maximum panel power (12V/24V)||260W/520W|
|Maximum panel tension at 25°C||100 V|
|LED supervision system||Intuitive configuration and easy monitoring thanks to a system of 3 leds allowing to know the state of charge of the batteries|
|Setting the battery type||4 charging cycles available, including one for lithium, which allows compatibility with all technologies|
|Charging cycle||Three-phase charging cycle with temperature compensation for optimal battery charging. Equalization cycle (depending on the selection of the battery type)|
|Self-consumption||0.12 W maximum|
|Temperature compensation||-0.03 V/degree|
|Electrical protection||Battery and solar panel polarity reversal / Solar panel overproduction (limits the intensity to the nominal value of the controller / Temperature|
|Terminal block section||4 * 10mm² (two solar panel inputs and two battery outputs)|
|Available options||Control panel, Bluetooth box and external temperature sensor (useful when the controller does not operate at the ambient temperature of the batteries)|
The efficiency of MPPT technology on this range of controllers reaches 98%, and the additional technology of Multi Peak Tracking Technology allows to increase the production of the solar installation in the case of a shadow partially projected on a panel.
This range extends from 20 to 50 Amps. You will find the entire range in the product sheet available under this link.
Les régulateurs MPPT optimisent le rendement des panneaux solaires - plus d'infos sur cette technologie sur notre blog conseil.