Solar MPPT controller 40 A 12 / 24 V

REF: EDR34ML2440

MPPT technology
Automatic detection : 12 / 24 V
Intensity : 40 A
Max power of the panels : 550 W / 12 V, 1 100 W / 24 V
Warranty : 2 years

Data Sheet

Instructions

Add to wishlist

€180.00 ^{Tax included}

IN STOCK !

Dispatched within 24 hours

Quantity

Description
Sur le Blog conseil

Solar controller MPPT 40 A (12 V / 24 V)

This 40 A MPPT solar controller allows to optimize the yield of solar panels. It is suitable for 12 V and 24 V installations (up to 550 W of panels in 12 V and 1 100 W in 24 V), it also has a three-phase charging cycle with temperature compensation.

Features :

Function	Optimization of the solar panels yield (20-30% gain) and complete and optimal recharge of the battery.
Maximum power of the panels (12 V/24 V)	550 W / 1100 W.
Maximum panel voltage	100 V.
LCD control panel	Easy setting of the regulator and access to the voltage and load information (intensity produced by the panels, voltages...).
Setting of the type of batteries	4 charge cycles available (one for gel and lithium batteries) and one charge cycle completely configurable by the user.
Charge cycle	Three-phase charge cycle with temperature compensation for optimal battery charging. Equalization cycle (depending on battery type selection).
Self-consumption	0.7 W to 1.2 W.
Temperature compensation	- 0,03 V / degree.
Electrical protections	Reverse polarity battery and solar panels / Overproduction solar panel / Temperature / Short circuit panel input and consumer output.
IP protection	IP32.
Dimensions	238 x 173 x 72,5 mm.
Section in mm² of the terminal blocks	10 mm².
Maximum consumer current	20 A.
Weight	2 kg.

Features of this range of MPPT regulators:

Theefficiency of the MPPT technology on this range of regulators reaches 98%, and the additional technology of Multi Peak Tracking Technology allows to increase the production of the solar system in the case of a shadow partially projected on a panel.
In addition to pre-programmed charge cycles, suitable for gel, AGM and open batteries, the controller allows for a charge cycle with customized voltages. The controller allows the storage of solar production data for up to one year.

This range extends from 10 to 60 Amp. You will find the whole range in the product sheet available under this link.