- New
- All TZ Pro software (4 displays via HDMI)
- Intel Core i7 1255U (1.7 - 4.7 Ghz) 12th Gen
- DDR4 32 GB
- 500 GB SSD
- W10 pro
- 9 to 36 V
- Power consumption: 7 to 60 W
- 230x200x68 mm (L x W x H)
- 2.64 kg
- 2-year warranty
New products
This solar controller MPPT 20A allows to optimize the output of solar panels. It is suitable for 12V and 24V installations (up to 260W of panels in 12V and 520W in 24V), it has a three-phase charge cycle with temperature compensation.
Function | Optimization of the yield of the solar panels (gain of 20 to 30%) and complete and optimal recharge of the battery. |
---|---|
Maximum power of the panels (12V/24V) | 260W / 520W |
Maximum voltage of the panels | 100 V |
LCD control panel | Easy setting of the regulator and access to voltage and load information (current produced by the panels, voltages...) |
Setting of the type of batteries | 4 charge cycles available (one for gel and lithium batteries) and one charge cycle completely configurable by the user. |
Charge cycle | Three-phase charge cycle with temperature compensation for optimal battery charging. Equalization cycle (depending on battery type selection) |
Self-consumption | 0.7 W to 1.2 W |
Temperature compensation | -0.03V/degree |
Electrical protections | Reverse polarity battery and solar panels / Solar panel overproduction / Temperature / Short circuit panel input and consumer output |
IP protection | IP32 |
Dimensions | 210*151*59.5 mm |
Section mm² terminals | 5 mm² section |
Maximum consumer current | 20 A |
Weight | 1.4 kg |
Option |
An optional RM5 control panel is available (EDR34SRRM5) |
The efficiency of MPPT technology on this range of controllers reaches 98%, and the additional technology of Multi Peak Tracking Technology allows to increase the production of the solar system in the case of a shadow partially projected on a panel.
In addition to pre-programmed charge cycles, suitable for gel, AGM and open batteries, the controller allows the setting of a charge cycle with customized voltages. The controller allows the storage of solar production data for a period of up to one year.
The range extends from 10 to 60 Amp. You will find the whole range in the product sheet available under this link.
Les régulateurs MPPT optimisent le rendement des panneaux solaires - plus d'infos sur cette technologie sur notre blog conseil.