
This MPPT 30A solar controller optimizes the efficiency of solar panels. It is suitable for 12V and 24V installations (up to 390W of 12V and 720W of 24V panels), it also has a three-phase charging cycle with temperature compensation.
Function | Optimization of the efficiency of the solar panels (gain of 20 to 30%) and complete and optimal charging of the battery. |
---|---|
Maximum panel power (12V/24V) | 390W/780W |
Maximum panel tension | 92V |
LCD control panel | Easy setting of the regulator and access to voltage and load information (current produced by the panels, voltages, etc.) |
Setting the battery type | 3 charging cycles available (Closed Lead, Gel, Open Lead) |
Charging cycle | Three-phase charging cycle with temperature compensation for optimal battery charging. Equalization cycle (depending on the selection of the battery type) |
Self-consumption | 20 mA |
Temperature compensation | -0.03V/degree |
Electrical protection | Battery and solar panel polarity reversal / Solar panel overproduction / Temperature / Short circuit of panel input and consumer output |
IP Protection | IP32 |
Dimensions | 228 x 164 x 55 mm |
Section mm² terminal blocks | 16 mm² |
Maximum current consumers | 30A |
Weight | 1.2 kg |
The efficiency of MPPT technology on this range of controllers reaches 98%.
The controller allows the storage of visible solar production data on the LCD screen.
As an option, a remote control panel can be associated with it.
This range extends from 10 to 40 Amps. You will find the entire range in the product sheet available under this link.
Les régulateurs MPPT optimisent le rendement des panneaux solaires - plus d'infos sur cette technologie sur notre blog conseil.