CATALOG AND PRICE LIST
ENERGY
COMPUTER SCIENCE
INSTALLERS
BLOG CONSEIL
New products
On a sailboat, while sailing, consumption is more important than at anchor insofar as the electronic equipment is in operation. The average consumption of a 12-metre cruiser when sailing is around 150 - 200 Ah when the pilot is in use, whereas at anchor it will be two to three times less.
The Seatronic S600 hydro-generator will be able to compensate for the totality of the consumption on board during navigation and even to recharge the batteries as soon as the boat is under sail.
This hydro-generator has a particularly efficient low-speed industrial motor which will ensure electrical production from 3 knots and complete autonomy from 5 knots. The generated drag (proportional to the produced power) is negligible.
Its fixing system makes it adaptable to any type of boat and the innovative lifting mechanism allows to change its position even during navigation.
| Function | Allows to compensate for the entire power consumption during navigation and even to recharge the batteries |
|---|---|
| High power output | 110 W at 5 knots or 220 Ah over 24 hours. 175 W at 6 knots |
| Robust design |
|
| Propeller |
Manufactured in composite using CAD software (optimized shape and minimal deformation thanks to the integration of carbon fibers). This propeller ensures a production from low speeds and ensures an optimal output (reduced drag and optimal production). |
| Regulator | MPPT optimizing the output of the generator and ensuring the compatibility 12 / 24 V (dimensions: 140 x 155 x 80 mm) |
| Easy and innovative lifting mechanism |
Innovative lateral lifting mechanism ensures effortless launching and lifting even when the boat is underway. This pendulum mechanism also allows the hydro-generator to follow the boat's list. |
| Disassembly | Easy removal of the hydro-generator by means of a pin system |
| Connection | Delivered with a three-pole plug to connect the generator to the boat |
| Materials used | Aluminium engine - High quality paint |
| Generator size | 280 x 100 (diameter) mm |
| diameter / Length Bearing | 200 x 90 (diameter) mm |
| fixing plate table | 90 x 90mm |
| shims for adjustment | 3, 6, 9, 12 or 15 degree shims supplied (to be determined when ordering) |
| Total height | 960mm |
| Deflector height | 660 mm |
| Weight | hydrogenerator : 7,1 kg / regulator : 1,4kg |
| Product warranty | 2 years parts and labor |
| Included in the pack |
- Hydrogenerator with 80cm of cable terminated by a waterproof plug with golden connector - Male waterproof plug for installation on the boat finished with 10m of cable - Bearing plate for fixing the hydro-generator. This plate is removable from the boat - Support plate and stainless steel counter plate to be fixed on the boat - Silent block system (polyurethane plates) to isolate the hull from the support - Composite three-blade propeller - MPPT regulator - 40A circuit breaker |
