Seatronic Gel Battery 12V / 107 Ah

REF: BG12110

Excellent cycling performance
VRLA GEL technology
AGM separator
Waterproof and maintenance-free
Dimensions (l*L*h): 330*171*214 mm
Weight: 29.5 kg

Data Sheet

Instructions

Add to wishlist

€294.00 ^{Tax included}

IN STOCK !

Dispatched within 24 hours

Quantity

Description
Sur le Blog conseil

GEL battery 12V 107 Ah - Seatronic

Seatronic GEL batteries are maintenance-free batteries designed specifically to meet the cycling requirements of service batteries. Their quality of construction will ensure that you have a reliable, high performance power source on board.

Advantages of SEATRONIC Gel batteries :

LIFETIME: Thanks to its hybrid technology, SEATRONIC batteries have a lifespan of 12 years in normal use.
MAINTENANCE-FREE: Thanks to their gas recombination system, SEATRONIC batteries do not require any maintenance during their entire life.
FULLY SEALED: The gel electrolyte prevents leakage even when the battery is held upside down. A safety valve ensures that the battery is sealed and no off-gassing will occur during normal operation.
SAFETY: The safety valve prevents any outgassing.
HYBRID TECHNOLOGY WITH AGMTM FIBRE SEPARATOR: The use of AGM fibre separator allows a fluid flow of current and offers remarkable performances in charge/discharge. This type of separator allows SEATRONIC batteries to have the best of the technology by combining AGM (for its charge/discharge performance) and GEL (for its cycling performance).
GREATLY LIMITED RISK OF SULFATATION: A major advantage of gel batteries is the possibility of leaving the battery discharged for a short period of time without causing irreversible damage (greatly reduced risk of sulphation). As the main cause of wear and tear of on-board batteries is related to sulphation, this is a decisive point in the choice of on-board batteries.

Function	Service batteries (excellent cycling performance and greatly reduced risk of sulphation). VRLA technology ensures watertightness (avoids any risk of acid leakage and hydrogen dissipation (except in extreme cases)). The hybrid technology developed by Seatronic with AGM fibre separators ensures very good charging and discharging performance.
Technology	VRLA (Valve Regulated Lead Acid) gel electrolyte with AGM (Absorptive Glass Mat) separator and flat plates.
Electrodes	High density anti-corrosive lead (99.99% pure lead) / calcium.
Voltage / Capacity	12V - 107 Ah
Cycling performance	300 cycles at 100% discharge, 650 cycles at 50%.
Capacity C20 - C10	107 Ah - 100 Ah
CCA	800A
Floating life	12 years at 25°C.
Charging voltage at 25°C	Absorption: 14.4V - 14.6V / Maintenance: 13.6V to 13.8V
Temperature correction	0.3V per 10 degrees (the higher the temperature, the lower the charging voltage should be)
Load current	30% of the nominal capacity. It should be noted that this charging current regulates itself naturally when the absorption voltage is reached. When the batteries are used in deep discharge and the charge source is large in relation to the capacity of the battery bank, it is recommended to install regulation systems with temperature sensors to adjust the absorption voltage.
Self-discharge	< 2% per month at 25°C. If not used, a refill is recommended every six months.
Operating temperature	-20°C à 50°C
Dimensions	330171214mm
Weight	29.5 kg
Terminal block	Copper insert M8
Guarantee	2 years