- New
- Versatile
- ready to use
- 53x39x24mm
- Re-accessible
- For rigid or flexible conductors up to 4 mm2
- Pre-filled with non-toxic gel
- no expiration date
- Small, compact and resistant
New products
This range of switchboards is particularly suited to metal boats (pleasure or steel), for which two-pole models are preferred. They use bipolar switches to prevent any risk of current leakage from the negative or positive side when the circuit is not powered. In the event of a fault in the electrical installation, a circuit breaker on the positive line disarms. Once the cause of the fault has been identified (e.g., a faulty connection or a problem with an appliance), the circuit-breaker can be reset and the installation is back in operation.
Like our single-pole switchgear, our double-pole switches incorporate an LED to indicate the circuit's operating status.
Each output is protected by a thermal circuit breaker rated from 3 to 15 amps (to be determined when ordering).
These switchboards are 12/24 volt compatible, and can be purchased with a hard-wired terminal block to ensure successful installation and easy on-board maintenance. We also offer customizable models (visuals and dimensions) that will fit your boat perfectly.
This panel includes a battery manager supplied with a 350 A shunt(see description under this link)
A label plate is supplied with the panel.
Version | 9 bipolar circuits |
---|---|
Function | Circuit control and protection. |
Voltage | 12 V or 24 V |
Circuit breaker type | Thermal (3 to 15 A). |
Switch | Double-pole with LED for monitoring circuit operation. |
Operating temperature range | From -20°C to 50°C |
Connection | 6.3mm female clips |
Dimensions (H x W) | 200mm*280mm |
Pre-wired |
|
The entire range has been designed to be modular, so the panels can be combined with each other to guarantee the scalability of the installation. In addition, great care has been taken with the quality of the cables and lugs used (reinforced lugs) to ensure maximum reliability.
To complement the switchboards, we offer a set of DIN rail-mounted terminal blocks for optimum distribution from each circuit. These terminal blocks are assembled in our Saint Malo workshop, with the length of the wiring harness between the panel and the terminal blocks to be specified.
These panels are assembled in our Saint Malo workshop, which means we can adapt your choice of circuit-breaker rating to your requirements. You can use the following link to send us your CHOICE OF BREAKER CALIBER.
This kit consists of a set of terminal blocks mounted on a DIN rail and connected to a wiring harness for connection to the boat's electrical panel. All you have to do is connect the boat's consumers, and you've got a clear installation. Visually, the distribution from the electrical panel becomes clear and comprehensible, facilitating electrical maintenance and servicing of your boat.
This kit comes with all components pre-assembled, enabling you to carry out the installation as a professional would.
Function |
Wiring kit for 9 circuit breaker panel connection |
---|---|
Permissible cable cross-section |
from 1 to 4mm² |
Connection method |
Screw connection |
Max. current per terminal block |
20A |
Compliance |
TBA |
Dimensions after assembly |
2 x 270*48*47mm |
Kit contents |
|
Sur notre blog conseil, découvrez LE TABLEAU ÉLECTRIQUE FABRIQUÉ SUR MESURE pour cette belle vedette de 1933, ainsi que d'autres tableaux électriques.