- New
- All TZ Pro software (4 displays via HDMI)
- Intel Core i7 1255U (1.7 - 4.7 Ghz) 12th Gen
- DDR4 32 GB
- 500 GB SSD
- W10 pro
- 9 to 36 V
- Power consumption: 7 to 60 W
- 230x200x68 mm (L x W x H)
- 2.64 kg
- 2-year warranty
New products
This solar controller MPPT 50 A allows to optimize the output of solar panels. It is suitable for 12 V and 24 V installations (up to 660 W of panels at 12 V and 1320 W at 24 V), and also has a three-phase charging cycle with temperature compensation.
This regulator has a particularly interesting format for on-board installation thanks to its compact housing that will allow it to easily find its place. The pre-drilled side fins make it easy to attach. It has an excellent level of performance (conversion efficiency greater than 98%) and will optimize your solar installation in the best conditions.
Function | Optimization of the solar panels yield (20 to 30% gain) and complete and optimal recharge of the battery. Compact size for easy installation on board. |
---|---|
Maximum power of the panels (12V/24V) | 660 W / 1320 W. |
Maximum panel voltage at 25°C | 100 V. |
LED supervision system | Intuitive setting and easy monitoring thanks to a system of 3 LEDs to know the state of charge of the batteries. |
Setting of the type of batteries | 4 charge cycles available, including one for lithium batteries, allowing compatibility with all technologies. |
Charge cycle | Three-phase charge cycle with temperature compensation for optimal battery charging. Equalization cycle (depending on the type of batteries selected). |
Self-consumption | 0.12 W maximum. |
Temperature compensation | - 0.03 V / degree. |
Electrical protections | Reverse battery and solar panel polarity / Solar panel overproduction (limits the current to the nominal value of the controller) / Temperature. |
IP protection | IP32. |
Dimensions | 183 x 127 x 70 mm. |
Section in mm² of the terminal blocks | 4 x 10 mm² (two solar panel inputs and two battery outputs). |
Available options | Control panel, Bluetooth box and external temperature sensor (useful when the controller does not operate at the ambient temperature of the batteries). |
Weight | 1,335 kg. |
Theefficiency of MPPT technology on this range of controllers reaches 98%, and the additional technology of Multi Peak Tracking Technology allows to increase the production of the solar system in the case of a shadow partially projected on a panel.
The range extends from 20 to 50 Amp. You can find the complete range in the the product sheet available under this link.
Les régulateurs MPPT optimisent le rendement des panneaux solaires - plus d'infos sur cette technologie sur notre blog conseil.